Axoblock - Test Files
Axoblock - Test Files
Published 2022-07-07T16:35:14+00:00
Our campaign is live!
https://www.kickstarter.com/projects/1365144247/odyssey-through-the-planes-3d-tiles-and-bestiary
This is the sampler set! and apparently a Gorb has also made its way inside! Grab your free files now!
This set includes enough tiles to create simple walls and floors, and showcases the possibilities of the system.
The system is intended for FDM or resin use, so whatever you have you can try it out!
- Quick note on the snap, the first attempt to snap might be a bit hard, but simply release the tile and do it a couple times, and you will get a satisfying connection that is firm and holds the tiles to the frame quite nicely. If your tiles wont "go in" your first layer might be a bit too squished! so try to elevate the first layer for a better lock.
Date published | 07/07/2022 |
Printed on Anycubic Vyper. The sweet spot for me seems to be the following settings with PLA. 0.2 layer height 0.22 initial layer height 2 walls (0.8mm) Outer perimeter speed: 60mm/s Inner perimeter speed: 100mm/s Infill speed: 100mm/s Initial layer speed: 25mm/s