StarWars Foldable R2D2
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×$3.99 StarWars Foldable R2D2
3D
It is a foldable R2D2 that many Starwars fans' love.
The folding process is as follows:
1) First, connect the sides of the body by inserting a small protrusion. The protrusions are small, making them slightly difficult to fit.
2) Then insert the top and bottom parts.
3) Pull the arm outward and lower it down to fix it.
4) Cut and fit the filament on the feet to represent the cable. Cut to 26 mm long and fit it on top. At the bottom, cut the filament by 33mm and insert it.
5) Put the feet made under the arms and body, this robot is completed.
The finished R2D2 can rotate its head and move its arms back and forth. There's a device inside the arm that doesn't go beyond the most appropriate angle.
=======================================
▣ You can download FREE at https://fab365.net/items/181
There are many other designs at fab365, some EXCLUSIVE.
And if you become a Fab365 member, you can get awesome FREE items and get PRIORITY purchases of new products.
=======================================
▣ Video Reviews
https://youtu.be/ktrYfD4CM2o
https://youtu.be/SlBZESC095Y
https://youtu.be/1Mv1F9M8lm0
https://youtu.be/-Qbtmsv3ybQ
https://youtu.be/JjcgVB5nIbo
https://youtu.be/oInRDpREf-E
https://youtu.be/Ym3sfL1gZ9g
=======================================
▣ Printing Tips : The arm may fall off the bed / plate during printing. In this case, use Raft. Raft holds the printout well during printing.
https://fab365.net/print-tips-list
=======================================
3D PRINTING SETTINGS
PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO
| Status | Rejected |
| Price | $3.99 |
| Time to do | 960 - minutes |
| Material Quantity | 64g |
| Dimensions | 196mm, 98mm, 61mm |
| Support Free | YES |