Sci-fi Dwarf Tank - Drilldozer
$15.00 Sci-fi Dwarf Tank - Drilldozer
3D
Published 2023-07-27T15:50:48+00:00
Pre-supported printable sci-fi/space dwarf tank STL
This pack includes 1 modular Tank for 32mm Games, ready to print (pre-supported and also unsupported .STL files).
With this pack, you can assemble a entire Sci-Fi Dwarf Tank in 2 different ways:
- Light Tank - Doors are openable and Interior is accessible. [17 cm (l) * 11 cm (L) * 7 cm (h)]
- Heavy Tank with a Big Bumper full of saws - Back is openable and the interior is doomed. [21 cm (l) * 11 cm (L) * 10 cm (h - With the top Canon)]
- You will find a guide (.pdf) to help you assemble both.
Base structure is designed to be easily printed directly flat with FDM printer (very few supports are needed, we used an Ender 3 v1 with a 0.4 nozzle and 0.16mm layer height resolution) for more robustness and to avoid potential deformations.
You can also print them in resin (not supported yet) but these specific parts have not been tested with this kind of printer.
All other pieces are designed to be printed with a Resin printer for more accurate details.
You can add some LED to create a good looking effect. In that case, several parts should be printed with transparent resin. We used 8 LED, 3 resistances and a 9v Battery (put in the trunk). Keep in mind this part of the project can be a bit tricky and it's more for avanced users.
If you have question(s) about this project, don't hesitate to contact us, we will answer as soon as possible ^-^
/!\ Holes can be a bit too small depending of the resolution of your printer. You can sand them lightly to simplify the assembly /!\
Modular
Pre-Supported
Designed for 32mm
Ready to print
Printers used for this project:
- Elegoo Mars 3
- Ender 3 v1 (without modification)
Base structure is designed to be easily printed directly flat with FDM printer (very few supports are needed, we used an Ender 3 v1 with a 0.4 nozzle and 0.16mm layer height resolution) for more robustness and to avoid potential deformations.
You can also print them in resin (not supported yet) but these specific parts have not been tested with this kind of printer.
All other pieces are designed to be printed with a Resin printer for more accurate details.
You can add some LED to create a good looking effect. In that case, several parts should be printed with transparent resin. We used 8 LED, 3 resistances and a 9v Battery (put in the trunk). Keep in mind this part of the project can be a bit tricky and it's more for avanced users.
If you have question(s) about this project, don't hesitate to contact us, we will answer as soon as possible ^-^
/!\ Holes can be a bit too small depending of the resolution of your printer. You can sand them lightly to simplify the assembly /!\
| Date published | 27/07/2023 |
| Price | $15.00 |