Superman Logo Bottle Opener
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Superman Logo Bottle Opener
3D
Published 2014-12-18T21:12:39+00:00
After a long day of saving the world, even super heros need to crack open a cold one. I can just imagine superman getting homeafter flying at supersonic speeds to capture a nuclear missle with his bare hands and redirecting it into the sun. He would be so exhausted he cound't get the top off Corona. This little guy will make that important job much easier. It is printed in 3 pieces. Sandwiched between the bottom 2 is a dime. I used gorrila glue as it is extremely strong. The top piece (red in the phot0) was printed using TPE (NinjaFlex). This makes it softer to the touch so as not to hurt his sensitive hands. The motivation for this design was my girl friends daughter. She works as a chef at Landau Grill in Woodstock NY. She wanted something to prove to everyone she was someone to respect in the kitchen. Superman is her favorite superhero, so this is what she got.
Print at 0.2 mm layer height, with 20% infill. This uses 84 g of filament and takes 389 minutes.
| Date published | 18/12/2014 |
| Time to do | 380 - 420 minutes |
| Material Quantity | 84g |
| Dimensions | 143mm x 93mm |
| Complexity | Very Easy |
| Support Free | YES |