Unicorn MoneyBox Scaled up 400% for Large Format Printers.
Unicorn MoneyBox Scaled up 400% for Large Format Printers.
Published 2017-08-16T14:35:27+00:00
After the Success of both the Unicorn and the Pegasus I had a Lot of Requests for Larger Prints The Biggest so Far coming from Chris (@ChimpusMaximus) at a Whopping 350%
Then I was asked by Sean (@Seananigans) to Remic the Unicorn into a Money Box for his Son.
How could I say No to a request from a Fellow Maker and a Chance to put a Smile on a Childs Face.
So I present to you the Unicorn Money Box.
Thank you all for your Amazing support and I will try to do my best to release more files soon.
Ryan (3D Printed Aspie)
Printer : Kodama Trinus
Rafts : Doesn't Matter
Supports : No
Resolution : Personal Preference
Infill : None
Notes : This was a Challenge to Scale up the Model without Making the Coin Slot too big so I scaled up to 400%.
It should Scale down Fine and as you can see from the Trinus Print but the Coin Slot is a bit too small for any Coins maybe a British 5p without Modification.
Date published | 16/08/2017 |
Support Free | YES |