Beyblade project
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Beyblade project
3D
This beyblade was made in thinker cad. The Main gear came from another maker, and same with the attack ring(mine is a modified version)Links to originals below. I needed to do some modifications to the parts, all of the Wdisk parts are a base and weight disk combined. If you use supports you'll need to do a little clean up. I designed the weight disk so that you could put dimes in them to add weight to the top.
*I would recomend that you also download the launcher and ripcord from joachim67.*
https://www.thingiverse.com/thing:1395135 (ripcord, main gear, launcher)
https://www.thingiverse.com/thing:242445 (original draciel by Kuny808(also made dranzer x ring))
Print the attack rings with 100% infill as they will be taking the most hits. The base if printed seperate can be done with 20% and weight at 100%. If you print the one with the weight and base together then a 50% infill works well.
| Status | Rejected |