Holder for Sony / Gopro action camera and Lights
Holder for Sony / Gopro action camera and Lights
Published 2017-11-28T13:21:47+00:00
Holder / Mount for sony FDR-X1000 camera and two flood lights. It uses standard mount sizes. Lenght is 160 mm total. Can accept standard go pro adapters / screws. The bolt barely makes it to the other side but it is not required, the screw fits tightly. Can be improved in a next model to allow for thread to engange the nuts better. Still it worked wonders. Have fun!
Update, Version 5 improves the screws and nuts connections. Now they should fit and engange the nut perfectly.
Printed in PET, PLA and ABS did not worked correctly, they were very easy to brake. PET has withstanded all abuse. Camera rig was alredy used in 19 dives, jumping from boat to sea and has no sign of any problem. :)
Total width is 160mm, space between center mount and sides is 51mm. I used standard mounts for go pro to attach lights.
No sanding required.
Printed with 4 outer shells, basically solid. Has a lot of strenght and still slightly flexible. No support material was required, one side has internal chamfers, print that side facing down so center part prints easier.
Date published | 28/11/2017 |
Dimensions | 160mm wide, 57 mm x 15mm height |
Technology | FDM |
Complexity | Very Easy |
Support Free | YES |