Rocket Egg Water
Rocket Egg Water
Published 2018-04-03T17:09:12+00:00
This object was made in Tinkercad. https://www.tinkercad.com/things/iD5LOoJRPku
The “Rocket Egg Water”!
Open your egg and find all component to make your water rocket! You just need a cork, an air chamber a bicycle pump and a glue gun for the mounting!
You find inside the nozzle and the aileron. The egg is the body of the rocket.
Look pictures for mounting or ask me a question!
TESTED AND APPROVED!!!
Mounting:
I soldered the components with the Dremel Versatip for a better fixture and every welds are coated of heated glue.
Using:
Fill 20cl of water inside the rocket, insert the "cork-valve" and pump.
He takes off 1m, it’s not a lot, but he can be upgrade.
Sorry for my English, this egg is “Made in France”
Printer: Anet A8
DAO firmware: Tinkercad
Printer firmware: Cura
Filament: ICE PLA
Printer settings: -Extruder: 200°
-Hot Bed: 60°
-Infill: 100% for egg and tuyere; 40% for ailerons
-Speed: 60mm/min
-Support zig-zag for egg
-Total duration: 30h
Date published | 03/04/2018 |
Time to do | 25 - 40 minutes |
Material Quantity | 119 |
Technology | FDM |
Complexity | Easy |