Simple Fox (Totemic)
Simple Fox (Totemic)
Published 2018-07-17T17:32:01+00:00
A simple fox figure made of basic shapes. I tried to get a feeling of foxiness without a lot of actual detail, in a kind of totemic style. As it stands, it is 93mm x 37mm x 63mm. It can be scaled up. It should probalby not be scaled down because the legs are already pretty thin.
The model probably needs supports and a brim if you are 3D printing it. There is a version that has a .2mm brim pre-made into the design because I had trouble printing with the slicer-generated brim and supports. That is the simple-fox-totemic-with-brim.stl file. Once I had my own brim, the supports generated by Prusa 3D Slic3r worked great. With the generated brim, it did not work so great.
This object was made in Tinkercad. https://www.tinkercad.com/things/ji8V6Vq0wKJ
The object with a brim is here. https://www.tinkercad.com/things/lsTCL4RxoHX
I printed it with my own brim and software-generated supports. It can be printed at .2mm resolution. I printed mine at .15 because it's a pretty small figure. It took about 2.5 hours to print. It is 93mm x 37mm x 63mm.
Date published | 17/07/2018 |
Time to do | 150 - minutes |
Dimensions | 93mm x 37mm x 63mm |
Technology | FDM |
Complexity | Easy |
White fox