TRD Tacoma Shift knob
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×TRD Tacoma Shift knob
This print is for an aotomatic TRD Tacoma Shift Nob that I designed on Inventor Pro 2019, this is of my own design
Infill Density 15
Infill Pattern Triangles
Printing Temperature 200 C
Printing Temperature Inital Layer 210 C
Build Plate 45 C
It is designed in inches
Thread is 8m x 1.25
Slicer is Cura on Apple OS
Printed it with the TRD down in the Z axis
Used a Raft to build on
Quality Layer Height .2mm
Shell Wall thickness .8mm
Wall Line count 2
Top/Bottom Thickness .6mm
Top Thickness .6
Top Layer 3
Enabled Cooling
Print Speed 60mm/s
You can also lay it on it's side and print it. I printed both ways, but I like the finish on the side ways version and you will have to use support on this one.
Status | Rejected |
Support Free | YES |