Everything has a super tight tolerance and will need to be hammered into place ( I also reccomend using clamps to squeeze them into place), glue is not nessisary for the leg core going into the body, however I used epoxy in between each main body componet. Using thread lock on the seat stool would be the best and epoxying it into the seat allows a very tight fit.

Print List:

(1) Seat

(1 of each) Main Bodies

(3) Leg Core

(3) Leg Accent 1

(3) Leg Accent 2

Shopping List:

https://www.lowes.com/pd/Hillman-1-in-x-36-in-Standard-SAE-Threaded-Rod/1000035133?cm_mmc=SCE_PLA-_-ToolsAndHardware-_-ThreadedRodAndMetalShapes-_-1000035133:Hillman&CAWELAID=&kpid=1000035133&CAGPSPN=pla&store_code=1191&k_clickID=3985dd32-c73f-4411-9a65-70e1d2fccff4&gclid=CjwKCAjwlejcBRAdEiwAAbj6KRicgTG7R5hZoNgX-lTX71_uyShuT8jZJplu6-zIc3eE24jygBPFoBoCQs0QAvD_BwE

Rod Will need to be cut in half

(3) 1 inch nuts

https://www.amazon.com/gp/product/B0093OFI7Y/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

(1) 1/8 inch dowel, will need to be sanded to fit.