Steemmakers Tower Box V2: Compromise Box
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Steemmakers Tower Box V2: Compromise Box
This is Version 2 of my Steemmakers Tower Box, which has the Steemmakers logo cut out of the box, and the slogan as a pop-out
I plan on uploading V1 and V3 shortly, where V1 will have both logo and slogan as cut-outs, and V3 will have a patterned surface, with the logo and slogan being the only flat parts going out of said surface.
There will be a design post later on my Steemit page, for those interested.
This object was made in Tinkercad. https://www.tinkercad.com/things/kMaoMDomp2q
Height of the box parts *should* be set at 3mm by default in this version, so the finger joints should work normally.
Status | Rejected |
Support Free | YES |