Remix of Mars Exploration Rover (Opportunity and Spirit)
This object is currently under review. We cannot guarantee its printability just yet but this object is shareable and people with this link will be able to see and download it. If you would like to help us guarantee the printability of this object, please upload a picture of it printed.
Remix of Mars Exploration Rover (Opportunity and Spirit)
I reorientated all parts, so they should be flat in Cura and ready for printing. If you have any suggestions feel free to comment. I'll try to fix it asap. Also I repaired the tires, which were non-manifold.
As for the original you have to print one from all parts. Except for the following:
6x tires, inner wheel, outer wheel and wheel center
2x strut pin 1 and strut pin 2
3x arm knob
You can also change colors at the following heights:
Solar panels at 1 and 5.2mm
Camera array at 6.6mm
Small cameraat 5.6mm
Top mastat 104.6mm
Small antenna at 10mm
Large antenna at 47 and 133.4mm
Sun dial at 1.4mm
High gain antenna at 0.6mm
All parts need support, except the solar panels.
Status | Under Review |