GK_Pauldron Modular Headset holder
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×GK_Pauldron Modular Headset holder
Published 2015-06-08T13:21:24+00:00
Design was meant to be cut out of acrylic in pecies, and then put together with a standard size/nut bolt. Meant as a mondular headphone holder that can be mounted to the wall via 3 nails in the center or 2 piece velcro to the side or front of your computer case. Can also be mounted to wall in different configurations to hold multiple headphones on each peice.
Peices can be 3d Printed as well, nut/bolt used for asthetic mock up. Compatible nut/bolt to be purchased from a hardware store.
HPH9.3_Back = print 1 peice (back peice)
HPHV9.1 = print 2 peices (2 center dividers)
HPHv9.1_2 = print 1 peice (front most part)
HPHv9.2_spacer = print 15 peices (spacer between dividers)
HPHv9.2_screw = print 5 pieces (for asthetic/mock up value)
HPHv9.2_nut = print 5 pieces ( for asthetic/movk up value)
hph9v1_modular = full assembly view
Date published | 08/06/2015 |