R 4b - Ring Ø85
R 4b - Ring Ø85
Published 2019-06-05T17:15:44+00:00
Name: R 4b
Outer surface: Ø85 spherical face with teeth and locking groove
Inner surface: Ø65 spherical smooth face with locking groove
Length=15mm
Radial and diagonal Ø3 locking holes
-
A full ring consists of 2 ½-Rings, put together and fixed with a piece of Ø2.85mm filament
The Ring is used as a gear wheel or as a 'base' for Ø105 Rings, that will be able to rotate in a spherical way around the Ø85 Ring.
It can be assembled around a Ø65mm Ring
It can be locked in a way that allow the Ø105 Ring to rotate around the center axis.
Finally the Rings can be fixed together so they will act as one Ring.
-
This module is part of the 'He-Ideas' mechanical building set
See more on my web-page https://he-ideas.weebly.com
I have printed this in PLA with the center axis in vertical direction and with support. Afterwards I have drilled up all the holes with a 3mm drill.
Date published | 05/06/2019 |