Aether Caves II: Arachnophilia
$6.00 Aether Caves II: Arachnophilia
Published 2021-04-01T09:12:56+00:00
Check out our latest Kickstarter, Eggnog&Brains right here.
Expand your caverns with this spider infested columns, rocks, and other cavernous features. It features 26 models in .STL format for 3d Printing.
This set, Caves II, is part of a series that has been long requested but rarely on workscreen. We had long wanted to make our own mark of caverns but we never wanted to feel like we “had” to make a full tileset of caverns. This set breaks many of our normal conventions. It’s all scatter, no tiles. It features columns that are made to print up right and support third stories of 2” tiles for massive buildouts. It features unique bumpouts, designed to allow for on-the-go reutilization of base models. It also features a unique and growing set of texture models from Will, Nasos, Jeromy, and Jake This set was voted for construction by our patrons and is second of many planned models.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 01/04/2021 |
| Price | $6.00 |
| Support Free | YES |
