AETYCH03 – Tycho City Clip-in Neon Signs
$1.00 AETYCH03 – Tycho City Clip-in Neon Signs
3D
Published 2022-07-15T08:56:16+00:00
This set is included in our 6 month loyalty pack for Tribers pledging $15 or more.
This set, Tycho City Clip-In Neon Signs, was made by Colin Christenson for our patrons and fans, mostly back in 2017-2018. These signs clip into any dragonbite clip spot for turning them into futuristic buildings. We’ve added many popular suggestions and we look forward to adding more to this set for our patrons and fans.
We hope you enjoy this set. We have love having a place on your gaming table.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim may be helpful on these models if you have trouble getting them to stick to your plate.
| Date published | 15/07/2022 |
| Price | $1.00 |
| Support Free | YES |