Anycubic Wash & Cure 3 PLUS resin tray washing support
Anycubic Wash & Cure 3 PLUS resin tray washing support
3D
Published 2024-03-14T11:33:21+00:00
FINALLY! RESIN TRAY AUTOMATIC WASHING... ;-D
it's a useful tool for Anycubic Wash & Cure 3 PLUS, with the aim of support Anycubic Photon X2 resin tray upright, in the alcol tank, without its basket, so letting the washing machine fully clean the dirty tray, a dream for me... ;-D
project is self-eplanatory, only I had to cut it in two pieces for my K1 bed measures, but is also easier to print.
you have to glue the central trusses together, and put M3 brass thread knurled nuts in both braces holes, and assemble it's very easy.
use appropriate M3 screws lenght, varying from 10 to 20mm, no matter exact lenght 'cause holes are passthrough, and accomodate also if are a bit longer. otherwise you can also use a longer screw passthrough all support and a bolt.
support measures are made to fit Anycubic Wash & Cure 3 PLUS, but I send also Inventor original files if you want to modify to fit other washer machines.
I think that this support will help you for (IMO) 80% annoiyng resin clean operations, and clean tank perfectly.
hope you enjoy it.
;-Dan from Italy
Print Settings
________________________
Printer brand:Creality
Printer:K1
Rafts:No
Supports:No
Resolution:0.28
Infill:5 - 10%
Filament material:PLA
| Date published | 14/03/2024 |
| Time to do | 2 - 3 minutes |
| Technology | FDM |
| Support Free | YES |