Asteroid Dicetowers/Terrain
$2.99 Asteroid Dicetowers/Terrain
3D
Published 2023-08-01T14:22:25+00:00
Prints in one piece on a Creality Ender 3 or similar FDM printers! If printed in sections, it can also be printed on smaller printers including resin printers such as the Anycubic Photon series or Elegoo Mars series of printers. It was designed and optimized for 12mm to 16mm dice, but can be printed larger to fit larger dice. This terrain/dicetower was initially designed for Brave Sun - Starship Miniatures game. It pairs well with space-based games and RPGs, and would also look great in a game of Warhammer 40,000 or other similar wargames, doubling as terrain on the battlefield.
Adds more randomness to dice rolls thanks to multiple steps and angles inside that cause bouncing. When printed in separate pieces, the dice-catcher in front can be easily removed to pick up the dice and roll again. The included peg files are designed to be press-fit, so you can get the perfect fitting and have no need for glue. (You may need to do a couple test prints of pegs to get the right fitting.)
Prints without supports thanks to strategically cut sections (and pre-hollowed .LYS files for resin printing). Print these asteroid dicetowers flat on the build plate. If printing with resin, just make sure your first layer exposure time isn't too high, and you'll be able to pop the pieces off the build plate after printing.
If you'd like to pick up an easy-to-learn, strategic, 3D-printable starship miniatures game, grab the Brave Sun Starter Pack here on MMF.
Prints without supports thanks to strategically cut sections (and pre-hollowed .LYS files for resin printing). Print these asteroid dicetowers flat on the build plate. If printing with resin, just make sure your first layer exposure time isn't too high, and you'll be able to pop the pieces off the build plate after printing. on the two main sections you are essentially printing "arches", so whatever settings you usually need for this (printing slower or with slightly higher exposure), it may be best to use those settings.
| Date published | 01/08/2023 |
| Price | $2.99 |
| Support Free | YES |