Aztlan Starter
Aztlan Starter
Published 2020-07-23T02:40:14+00:00
Aztlan Starter is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and this introductory set will give you everything you need to get started making dungeons. This set includes a unique floor, door, and stairs models not found in other sets. It is compatible with all other DragonlockTM models. In our World of Aach'yn, Aztlan is the home of the Azite Snakefolk and is filled with primal terrors of unspeakable horror. Warring tribes of Azite fight over the control of tombs old and new, while interlopers are disposed of without a morsel of mercy.
Check out our latest Kickstarter, Sky Islands, right here. You can snag several free giveaways during the campaign!
RECOMMENDED TERRAIN PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features.
Infill: 10% for all models recommended. Less infill is possible, but models will be less sturdy.
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Door parts print best with a brim. 2x2 tiles do not require brim, raft, or supports.
| Date published | 23/07/2020 |
| Dimensions | 50.8mm x 50.8mm x 52.1mm |
| Support Free | YES |
