Bird feeder | suet ball holder
144
views
0 comments
Loading comments...
$4.00 Bird feeder | suet ball holder
3D
Published 2024-01-12T12:04:34+00:00
1
0
Add to Collection
Description
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
A lovely suet ball holder with a roof for rain protection. Keep the little wild birds in your garden fed over the winter with this little house-inspired feeder.
The roof keeps off the worst of the rain – For the rest there are drainage holes at the bottom.
Instructions
- Print all three parts
- Insert up to four balls with the usual diameter of 50 – 60 mm. 66mm is the maximum size that fits.
- Screw on the roof
- Insert the holder carefully until it snaps in place.
- Place it in a visible spot where you would expect birds to go.
- Check in on the thing occasionally to refill it. The birds here already picked quite the holes into the balls over a weekend – so maybe once a month it is time to refill it.
- Enjoy!
Size assembled: 120 x 120 x 314 mm
Interior size: 66 x 66 x 205 mm
Printing Details
- Required build volume: 130 x 130 x 210 mm
- Material usage: 170 g
- Material: PLA
- Print direction: stls are rotated correctly, check images
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 3
- Infill: 15%
- Build plate adhesion type: none
Technical Information
Date published | 12/01/2024 |
Price | $4.00 |
Support Free | YES |
More Information
Object Parts