Blood Lord Nefarkus
$3.00 Blood Lord Nefarkus
Published 2021-07-01T16:16:31+00:00
SPAWNS OF THE GREAT ROT
Chapter: Ghuls
Subject: Blood Lord Nefarkus
Description
Nefarkus was... is a powerful bloodmancer, one of the strongest. A great loss in the war against the Ghuls and Geists. He was the first one to cut off the corrupted anima system from the rest. Unfortunately, he got corrupted himself. He knew the risk, and he even tried to kill himself before the corruption took over, but unfortunately for us, his blood was too strong to burn. He rose from the ashes and slaughtered every single one of his followers.
Now he is leading the massive hordes of Ghuls, he seems to still be conscious of his actions, almost as if he chose to join the Ghuls. He is able to control vast groups of these monsters and uses his infamous blood magic to resurrect and heal them. He even managed to break into one of our Blood Chambers and steal a Blood Altar. He just broke the whole thing off the ground and took off on it. He now flies around on this altar and spreads his blood to all the Ghuls, it seems to empower them. I just hope we are able to stop him soon.
Details
This model comes with an unsupported and presupported version.
This model comes on a 40mm customized base.
Get 40% discount on this model by joining my Patreon!
3D Elements Printing guide
- Models validated and supported for 50um LH (0,05mm)
- If you cannot print them on mono printers I suggest to increase cure time (even with fast resins even to 2.6s)
- I suggest 5 burn in layers (you can also add 2 transition layers)
- Raft is thin to prevent raft separation and resin wasting + FEP degradating
- If you struggle with removing supports please use warm water to make them soft then remove it
- Cure your model after removing supports and be gentle since some of the parts are thin.
General info of codes:
Presupported = heavy presupports
L-Presupported = Lighter version of supports
LL-Presupported = they are most lightly supported, working good with well calibrated printers, also leaving minimum ammount of scars on the model.
Hollowed versions only in LYS files.
Please consider to use them instead STL, they create less suction forces that means it minimise chance for failed print!
Cheers.
Happy Printing,
- Daniel Krasuski
Date published | 01/07/2021 |
Price | $3.00 |