Breathe Easy Facemask
Breathe Easy Facemask
3D
Published 2020-04-21T19:41:54+00:00
I wanted a facemask design for easy breathing. Maximum surface area of filter without blocking my view, so the canisters needed to be at the bottom.
This is a modified version of the GEMINUS Dual Filter by vulevu121 to adapt to the N95 filter of COVID-19 MASK v2 by lafactoria3d.
Added a third port, increased the size of the canisters to the side for maximum air flow. You'd need to cut pieces of N95 filters or equivalent to size. These filters will be clamped down when tightening the screw caps.
Print 2x canister and caps
See image to see how these are placed onto the print bed.
Print Settings
Printer:
Anycubic i3 Mega
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
15%
Filament_brand:
3D Aura
Filament_material:
PLA
Notes:
Used brim. Prints slow, took about 10 hours! But it will be so worth it
| Date published | 21/04/2020 |
| Time to do | 10 - minutes |
| Material Quantity | 100g |
| Support Free | YES |