Bubbles Powerpuff Girls
Bubbles Powerpuff Girls
3D
Published 2021-03-03T10:57:46+00:00
Bubbles from the Powerpuff Girls series back in the 90's.
This is a modified and fixed version using Meshmixer and Netfabb that is ready for 3D printing.
You can print it as a whole and I have also split it into 3 parts (head/body/base) for easier printing and support removal.
The original can be found here:
https://www.myminifactory.com/object/3d-print-buttercup-power-puff-girls-7629
Step 1 - Printing
Print and remove supports
Step 2 - Using sandpaper
Use sandpaper to smooth out your print.
I used different grits (120 then 180 then 320) to make sure its as smooth as possible.
Step 3 - Painting
Apply Gesso as a primer to coat the whole print and wait for 10 minutes for it to dry,
then you can start painting the model as you like (I used pebeo matt colors).
After the paint has dried out (wait for a day to fully dry) use transparent finishing varnish to preserve and protect your model and to give it a tight and supple cover.
Finally
That's it, now enjoy Bubbles as she smiles back at you. 😊
For more models or to support me visit:
https://linktr.ee/valley3d
Printer used: Snapmaker 2.0 A350
Rafts: No
Supports: Yes
Resolution: 0.16mm layer height
Infill: 20%
Filament brand: Generic
Filament color: White
Filament material: PLA
Slicer: Cura
| Date published | 03/03/2021 |
| Time to do | - 660 minutes |
| Material Quantity | 79 grams |
| Dimensions | 87.1 x 77.5 x 109.1 |