City of Firwood - Wizard Tower
7,776
views
34
collections
2 comments
Loading comments...
$14.00 City of Firwood - Wizard Tower
3D
Published 2022-07-12T09:55:39+00:00
129
2
Add to Collection
Description
This building is part of the Kickstarter campaign 3D Printable City of Firwood - STL files.
Stop by the Late Pledge, you might be interested in the whole project, it is much cheaper than buying all the houses separately (15 Buildings + Props for just 65$).
The building is designed to be printed on FDM printers, without using supports with a printer with a printing area of at least 20x20x20cm, an Ender 3 or similar is enough.
Some features of all buildings:
- Playable interiors
- Doors that open
- Holes to simulate glass windows.
The building can be printed with resin printers, many backers have done it, but they are not designed for resin printers. You may have to cut a lot of pieces to fit your print size on a resin printer.
Technical Information
| Date published | 12/07/2022 |
| Price | $14.00 |
More Information
Object Parts
STL Miniatures - City of Firwood - Wizard House. One of several fantastically created buildings that are a pleasure to print. No supports needed for real. Only problem with these early models are the doors, The door relies on a small printed pin to pivot on, mine broke several days after painting. To remedy this, I edited the file to have a 2mm hole through the door vertically, and then used my pin vise to drill a hole on the bottom. Amazon sells 2mm steel rods. I simply cut one to length and fixed my doors to the new rod. The tower is very tall and I have broken parts from them falling. I have gone through each layer, drilled holes and installed magnets. Total Print Information: 131hrs 15min (1126 grams of Filament)