This model is a Hueforge 3D Printing Painting. You need a 3d printer that supports multi-color to 3d print it.

The 3D printer filament of our recommendation is PLA. If you want to make this Painting by yourself, you can buy the filament combo: https://www.sunlu.com/products/hueforge-painting-combo

3D PRINTING SETTINGS:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sunlu PLA Black Transmission Distance: 0.6
PLA Sunlu PLA Red Transmission Distance: 8
PLA Sunlu PLA Orange Transmission Distance: 10
PLA Sunlu PLA Pure Yellow Transmission Distance: 5
PLA Sunlu PLA White Transmission Distance: 7

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #10 (0.88mm) swap to Orange
At layer #12 (1.04mm) swap to Pure Yellow
At layer #13 (1.12mm) swap to White for the rest.

Your last slider is set lower than the model height.  Consider trying Clipped Depth or Dynamic Depth instead of Static.  It is currently being treated as if it goes all the way to the top.