"demibot" fpv drone xt60 wire guard
1,282
views
0 comments
Loading comments...
$1.00 "demibot" fpv drone xt60 wire guard
3D
Published 2022-12-21T12:21:50+00:00
0
0
Add to Collection
Description
This is an xt60 cable managment/wire guard to prevent propstrike to your power wires. It is part of the demibot skins bundle. It slips over the standoff in front of the stack. In my build I rotated the stack 180 so I soldered my wires out the side. The part prints in place with the larger opening facing up, The bottom part becomes the support for the top half. This frame is already heavy so the focus my design is effective simplicity.
consider donating a couple dollars so I can keep bringing you parts
Printing Details
I use .5 nozzel with the first layer printed at 200 degrees, 190 degrees after that. Fan at 90%, 100% durring bridging. And print speed is 45mm
Technical Information
Date published | 21/12/2022 |
Price | $1.00 |
Time to do | 18 - minutes |
Material Quantity | 2g |
Support Free | YES |
More Information
Object Parts