Double Lift Marble Run
Double Lift Marble Run
Published 2019-12-02T18:43:06+00:00
An inspirational design re-engineered for 3D Printing.
Its designed to be used with 10mm balls/Marbles.
It is very addictive to watch. The design allows for use of up to 4 marbles with ease.
You will find the build instructions here:
https://www.youtube.com/watch?v=jIGBb8CHVqw
3D Printer used:
Creality3D CR-10: https://www.banggood.com/custlink/mKKKbFZRH4
To complete this project, you will need the following
5 MR105 Bearings
https://www.banggood.com/custlink/KG33zZj9GT
3 M5 x 20mm Screws
1 M5 x 15mm Screw
1 M5 x 10mm Screw
2 M3 x 20mm Screws
4 M3 x 10mm Screws
1 M3 x 20mm Screw
8 M3 Nuts
Fastners on BangGood:
https://www.banggood.com/custlink/3G3mncuPP4
1 KCD-101 Switch
1 9V Battery Connector
1 12V Geared Motor
https://www.banggood.com/custlink/mDvGAr758t
A small length of DC Wire
Your Favourite Bonding Agent.
And some 10mm Steel Balls
https://www.banggood.com/custlink/3DG3AcfV80
You will also require the following tools:
Appropriate screwdriver (Powered Recommended)
Clamp
A pair of pliers.
All BangGood links here are Affiliate Links.
| Date published | 02/12/2019 |
| Time to do | 14 - 16 minutes |
| Support Free | YES |
I added a PWM speed controller to play with the speed of the gear train for more fun, this is a great print.