Ender 3 Pro LCD Bezel
Ender 3 Pro LCD Bezel
Published 2022-06-13T08:48:33+00:00
This is a simple LCD Bezel for the newest Ender 3 Pro Model. There is no need for modifications or additional hardware to install. This print is quite a precise fit so make sure your edges are very clean and smooth.
Step 1: Remove dial knob by grabbing the whole knob and pulling towards yourself
Step 2: Remove 2ea 3mm front mount screws
Step 3: Remove 4ea 2mm from the backside of the LCD screen that mount the circuit board to the frame bracket
Step 4: Snap your 3D printed bezel to the frame. (You will have to slightly contort the bezel to have it seat fully.) Take care not to crease/wrap the bezel as it won't fit flush if that occurs.
Step 5: Follow Steps 3, 2, 1 to complete the install!
Date published | 13/06/2022 |
Time to do | 5 - 20 minutes |
Material Quantity | approx. 2g |
Dimensions | 84.8mm x 57.0mm x 3.8mm |
Support Free | YES |