Eryone Thinker S/SE Reel Mod Adjustable.
Eryone Thinker S/SE Reel Mod Adjustable.
3D
Published 2020-11-07T07:20:18+00:00
This is a adjustable centering reel adaptor based on a existing stl.
This has been design to fit directly over the 70mm x 10mm Enyone spindle reel holder.
To fit first remove end screw and metal washer place large printed washer on spindle.
Place reel holder on spindle followed by the small washer placed on end screw screw up tight then replace reel lift until centred and screw on end piece, your spool is now centred and will rotate freely.
Parts are grouped and can be adjusted individually although I have found the parts to be perfect for my stock Eryone Thinker SE (stock).
These parts were printed in PLA.
Heat setting will vary and will print settings from machine to machine so I won't bother putting mine up.
No supports needed
I used 30 infil
Shell 0.8
Please try and feel free to adjust and upload like if you do.
Thanks.
iquate
| Date published | 07/11/2020 |
| Support Free | YES |
