Flexi Clownette
$3.50 Flexi Clownette
Published 2023-11-03T09:11:52+00:00
This design features a unique snapping joint system that allows you to adjust the model's stiffness and flexibility.
I've provided two versions for your convenience:
1. Clownette-Free-Joints
2. Clownette-Snap-Joints
If your printer tends to have over-extrusion issues, I recommend using Free-Joints.stl file, However, I must say that snapping joints add a lot of fun to the process! 😁 I've included a short video in this post demonstrating how to snap the joints.
As always, I've also included a pre-painted (.3MF) version for your convenience, but feel free to change the colors to your liking.
To ensure the best results, please follow these suggested settings:
Support-free design
Layer height: 0.16mm
Wall count: 3
Bottom layers: 4
Top layers: 5
Infill: 10% (Gyroid)
Use a Brim for better layer adhesion
If printing in multiple colors, don't forget to auto-calculate flushing volumes!
Do not Downscale more than 20% (If you still want to go further downscale remember to get at least 3 walls on the joints!)
Date published | 03/11/2023 |
Price | $3.50 |
Support Free | YES |