Flow Calibration Matrix (download the .3mf file)
Flow Calibration Matrix (download the .3mf file)
3D
Published 2020-11-30T14:12:52+00:00
Download the .3mf file instead of the .stl file.
(The .3mf file is already set up correctly to test your printer's flow.)
- You must enable brim to hold the pieces together (10 lines should be enouth) and preferably set line width to 0.4mm.
- You should obtain at least one box with the surface fully filled but without an excess of filament.
- If your print is well configured for your filament, you should get the best impression on the 9th box (1.00).
- See the correction factor image to see how much you need to change the flow of your print.
Example: if your best impression is on the 0.70 box, you must correct the flow to 70%.
Instructional video (in Portuguese - turn on subtitles if necessary)
https://www.youtube.com/watch?v=nqgzjwpc9F8
The original file was taken from Jasmine's GitHub
https://github.com/jasminemoreira/3D_printing/tree/master/Calibration_Matrix
Thanks to Jasmine Moreira!
https://www.thingiverse.com/jasminemoreira/designs
You can help me buy a beer! :)
Any amount would make me happy and extremely grateful.
PayPal: https://paypal.me/maurymmarques
Patreon: https://patreon.com/maurymmarques
| Date published | 30/11/2020 |
| Support Free | YES |
