Flysky GT-5 Camera Mount System
Flysky GT-5 Camera Mount System
Published 2021-10-26T11:47:26+00:00
Easy to print, easy to use, extremely versatile, and completely reversable! This mount system allows you to attach phones, cameras, lights, microphones, and anything else that uses either a 1/4" camera mount or a cold shoe camera mount to your Flysky FS-GT5.
See a full walkthrough of the mount system here:
https://youtu.be/da64hvBgRms
Watch example footage shot exclusively with the mount:
https://www.youtube.com/watch?v=puFtV4xY23w
NOTE: To make full use of the system, you will need 1/4-20 partially-threaded bolts in 3-1/4" and 6" lengths.
DISCLAIMER: It should go without saying that the camera mounts and other accessories pictured are not included. Use whatever you have or whatever you prefer! Personally, I really like the ULANZI mounts from Amazon.
This system is very robust, but it is not indestructable. Overtightening of the bolts and excess force may result in damage to 3D printed parts.
- All parts print without supports. Brims are optional.
- PLA and PETG have been tested successfully, but PLA is recommended.
- The tray prints on the front face in the upright position. The knobs print with the hex facing UP. The retainer prints with the lip pointing UP. The spacers print on a flat face.
- I recommend printing the knobs and retainer clip SOLID (100% infill). All other parts print with a shell count of 4 for added strength. Infill 15% or more.
Date published | 26/10/2021 |