Ford FlatHead V8 (10/14) / Intake Manifold remix
Ford FlatHead V8 (10/14) / Intake Manifold remix
Published 2021-05-17T07:53:22+00:00
This is an Intake Manifold remix for the Ford FlatHead V8 engine.
This design is planned to receive a supercharger soon.
Original engine : https://www.myminifactory.com/object/3d-print-106731
My final project :
Release
24/03/2020 : New IntakeManifoldPulleyV2 (it replace IntakeManifoldPulley) with deeper groove to prevent the belt from jumping.
30/03/2020 : New IntakeManifoldPulleyHolderV2 (it replace IntakeManifoldPulleyHolder) for the correct position of the Supercharger.
Print Settings
1 x IntakeManifold : Layer:0.15mm Raft:no Brim:no Support:yes Infill:15%
1 x IntakeManifoldGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
2 x IntakeManifoldPulleyV2 : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x IntakeManifoldPulleyHolder : Layer:0.15mm Raft:no Brim:no Support:yes Infill:80%
1 x IntakeManifoldTop : Layer:0.15mm Raft:no Brim:no Support:yes Infill:30%
1 x OilBreatherBottom : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100%
1 x OilBreatherFilter : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x OilBreatherGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
1 x OilBreatherTop : Layer:0.15mm Raft:no Brim:no Support:yes Infill:20%
1 x OilBreatherPipe : Layer:0.15mm Raft:no Brim:no Support:yes Infill:20%
Accessories
8 x 4mmx2mm disk magnet
10 x m3 threaded insert
20 x m3x3mm SHCS
10 x m3x8mm SHCS
2 x m3x10mm SHCS
2 x m3x30mm SHCS
6 x m3 washer
2 x m3 jam nut
4 x 623zz bearing
Assembly
Look at pictures.
More add-ons
https://cults3d.com/en/design-collections/dancan13f/ford-flathead-v8-engine-add-ons
Date published | 17/05/2021 |