Fruit bowl “Wind”
479
views
2
collections
0 comments
Loading comments...
$5.00 Fruit bowl “Wind”
3D
Published 2023-02-14T14:38:03+00:00
0
0
Add to Collection
Description
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
A big and unique fruit bowl made from 3d printed parts and commercially usual wooden skewers.
Instructions (go along with the images)
- Print the base, 44 of the connectors_up and 44 of the connectors_down
- Buy a pack of 100 wooden skewers (you can get them for a few bucks in most supermarkets or online; you only need 88 but you may break one or two during the assembly) Size: 200mm x 3mm
- Start the assembly: begin pushing in the skewers with the flat end into the base on the LEFT next to the cut out
- Push in all the skewers and add the connectors counterclockwise ( _up for the upper part; _down for the bottom part)
- Push the last skewer into the connectors and bend it a little into the cut out.
- Repeat for the other part
- Enjoy!
Size assembled: 400 x 400 x 334 mm
Printing Details
- Required build volume: 140 x 140 x 40 mm
- Material usage overall: 270g
- Print time overall. 29h
- Material: PLA
- Print direction: stls are rotated correctly, check images
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 3
- Infill: 10%
- Build plate adhesion type: none
Technical Information
Date published | 14/02/2023 |
Price | $5.00 |
Support Free | YES |
More Information
Object Parts