Handle-Adaptor For Cellphone Tripod-Head
Handle-Adaptor For Cellphone Tripod-Head
3D
Published 2020-11-30T09:50:22+00:00
I get a Zecti Head for my SmatPhone, but when try to do some shots I realize that the Z and X axes are not align with the camera. To get a better aligment I have to upsidedown the Phone (old S7). The adapters prevent the buttons from beign pressed by mistake, and for a better move, I add the handdle. Also have to upsidedown the Camera support of the head.
I had a flat head screw to put in place the handdle.
Hope this help you, print and enjoy!!
Handle printed vertical at 60mm/s Print Speed. For wall, I use 1.2mm. Four layers for Top and Buttom. Infill at 30% with Grid Pattern. Support Pattern ZigZag, 45° Infill line direction, 15% Density. Ten Skirt lines to increase print area.
-Ender3-Pro
-Cura Slicer
-Nozzle temp 220°
-0.4 Hardened Nozzle
-Bed Tempt 60°
-Wham Bam PEX
-Silk Cooper CC3D PLA
Smartphone adapter printed both at the same time back to back at 60mm/s Print Speed. Consider just a feew lines of wall, I use 0.8, so that gives you between inner and out wall a total of 1.6mm. Four layers for Top and Buttom. Infill at 20% with Grid Pattern.
-Ender3-Pro
-Cura Slicer
-Nozzle temp 205°
-0.4 Hardened Nozzle
-Bed Tempt 60°
-Wham Bam PEX
-Silk Yellow 3dSolutech PLA
| Date published | 30/11/2020 |
| Time to do | 60 - 232 minutes |
| Material Quantity | 44gm |
| Dimensions | D30mmxL120mm |