Headphone Monitor Mount
Headphone Monitor Mount
3D
Published 2018-07-27T16:44:36+00:00
Get the Full write up on my blog.
Summary
This is a headphone mount that attatches to the top corner of your computer monitor using a 3D printed screw. It works perfectly for my current setup, ASUS VS248H-P and, Steelseries H Wireless. Using the parameters option (Modify > Parameters) in Fusion 360 this design can easily be adapted to any monitor/headset combination.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.40 mm
Infill:
15%, 4 Perimeter layers
Notes:
The monitorHeadsetMount I printed upside down to minimize the amount of supports. You still need some supports underneath the hook part but otherwise this orientation does really well, even the threads. Another advantage of this orientation is it puts the layers in the same direction of the force when mounted so you don't have to worry about the layers splitting and the part breaking.
The monitorHeadsetScrew prints pretty well on either the top or bottom faces.
| Date published | 27/07/2018 |
| Technology | FDM |
| Complexity | Easy |