Headphone stand MRK I
Headphone stand MRK I
Published 2021-12-06T12:32:03+00:00
3 - piece headphone stand which can used for even Large Headphones. Also has a secret storage space suitable enough for pen drive or coins.
The MRK I headphone stand is inspired from scorpion, 3d model is made on Autodesk Inventor and rendered in Blender.
This is a free version feel free to check out and please do share your thoughts.
Video:
https://www.youtube.com/watch?v=Ar2wO4ulIRM
All the G-code files are available if you want to print straight away "code is made for Creality ender 3 v2, if other printer is used check the code and other setting before starting the print"
Note: In case you use Ultimaker Cura the stl file are scaled down if you don't have Autodesk's plugin, its not a issue though you can give 10x scale. In my case as the base is already big for my printer 20*20 cm usable platform so I went with 0.9 scale for all the parts. If your printer supports more than 20*20 cm you can print full size.
But for the vertical tail alone I left the vertical scale at 1.0 since my headphone is large (around 27cm tall : Razer Nari ) if your is small or moderate around 20cm or so you can go with all 0.9.
Settings: I have used 20% infill material with 0.2mm profile for all the parts.The print including all the parts took around 14hrs, used pla with extrusion temp at 207C and base at 60C print speed being 50mm/sec. Printed on Creality Ender 3 v2.
My setting are only for reference, if you know what work well for your printer/configuration please go ahead with those.
Date published | 06/12/2021 |
Time to do | 14 - 15 minutes |
Material Quantity | 120 |
Dimensions | 186.6791*167.5*232.8 |
Support Free | YES |