Hexagonal prism twisty puzzle
Hexagonal prism twisty puzzle
3D
Published 2020-05-20T12:24:28+00:00
This twisty puzzle was designed to be completely 3d printable, no screws required. This puzzle is similar to a square-1 in the sense that it can only turn on one axis across the middle. Furthermore, the side tiles can either be glued into place or one can be left out and the rest of the tiles can be left to slide freely to create a different solving experience.
This model should print fine without supports, however, there are a few small overhangs on the core and edge pieces. if you do decide to use supports then just make sure that on the core there are no supports under the track that the pieces slide into or in the pin hole as supports in these spots are very difficult to remove
How many of each part to print
- core x2
- edge x12
- top tile x12
- side tile x18
- pin x1
| Date published | 20/05/2020 |
| Material Quantity | 106 grams |
| Dimensions | 54mm x 54mm x 61mm |
| Support Free | YES |