HUAWEI FREEBUDS 3 WALL HANGER + CLIPS STORAGE
HUAWEI FREEBUDS 3 WALL HANGER + CLIPS STORAGE
3D
Published 2021-12-29T11:19:12+00:00
We love these Freebuds 3. They are great. But unfortunately, they keep falling off (some of us don't have perfectly-shaped ears as the rest of the world!).
We found out that we can use rubber clips to prevent them from falling! but then they don't fit in the charging casing...
Soooo, we designed this wall hanger, with storage to place the rubber clips as well :D And another version without the storage... you know, for people with normal/standard shaped ears who don't need the rubber clips ;)
Storage versions have two parts: A and B.
Non-storage versions only have one part.
For both the storage and no-storage versions, we made sub-versions with and without magnets.
The sub-versions without magnets have a flap to prevent the Freebuds case from falling.
The sub-versions that use magnets don't have this flap, but the Freebuds case stays in place safely as long as you attach the hanger to a vertical surface.
Additionally, the versions with magnets need the following sizes:
- 10 mm diameter x 2 mm thickness. Qty: 2
- 6 mm diameter x 1 mm thickness. Qty: 4
Where to buy those rubber hooks for your earbuds?
You can find some examples on Amazon (affiliate link)
Follow us on INSTAGRAM!
0.2 mm layer height
60 mm/s overall speed
Infill: 5% (but irrelevant, actually)
0.42 mm line width
No supports
We used PLA filament :)
| Date published | 29/12/2021 |
| Time to do | 60 - 130 minutes |
| Material Quantity | 20 grams |
| Dimensions | 90 x 70 x 30 mm |
| Support Free | YES |