IKEA Kuggis magnetic tag (parametric)
IKEA Kuggis magnetic tag (parametric)
3D
Published 2022-05-18T11:51:29+00:00
I find IKEA Kuggis storage boxes super handy, but when you have many of them it can became difficult to remember what's inside (if you have the non-transparent versions).
Those are simple magnetic tags to better organize your storage. They work both on the sides and on the lids, but they can be used also on any magnetic surfaces (boards, fridges…)
I've included the Fusion360 file if you want to modify the tag diameter. Just play with the parameters, it's pretty self-explanatory. If you modify it please post a remix!
The tags print very easily. There's a little overhang, but keep your supports disabled and it'll print fine.
They can be printed almost empty so they weight less than 10g. Ideal for those almost empty spools of filament you've laying around (different colors could help!).
You'll need to insert a D10x2 mm magnet inside, and you'll need another one inside the box to keep the tag in position (you don't need the second one if you use the tag on magnetic surfaces).
To insert the magnet just slide it into the hole and push it hard with some tool until it locks in place.
| Date published | 18/05/2022 |
| Support Free | YES |