Insta360 X3 BestCase Hard Shell Case + Cage w/ Case
$6.99 Insta360 X3 BestCase Hard Shell Case + Cage w/ Case
3D
Published 2023-01-27T08:08:05+00:00
Keep your Insta360 X3 safely contained with this BestCase Hard Shell Case. This case firmly holds the X3 from the edges, protecting the lens and other sensitive components.
Parts print easily without supports. PLA works fine if you keep it out of the heat, otherwise use PETG, ABS, Etc...
*For proper fit, align the rectangular graphic on the case with the front of the X3 ( side with the touchscreen ). The camera isn't perfectly symmetrical*
This purchase also includes the X3 Cage, which is fastened onto the X3 using an M3 nut and screw (5-15mm, 8mm recommended). There is also a case that fits the X3 while wearing the cage.
You can further secure the case using a Grifiti 4x.25 silicone band or other elastic band.
Photographed BestCase model was printed with Polymaker PolyTerra Matte PLA, available from Polymaker and Amazon
Cage and Cage Case model printed with eSun PETG and Fillamentum CPE
Print solid for maximum protection, although the cage is fine with light infill and 6 shells. Do not overtighten the M3 screw or you may crack the print.
| Date published | 27/01/2023 |
| Price | $6.99 |
| Support Free | YES |