Jet Engine Component ; Planetary Gear, Modified Parts
Jet Engine Component ; Planetary Gear, Modified Parts
Published 2021-09-26T13:55:17+00:00
This is a modified parts set to reduce print time and finishing time after print for the following design.
https://www.myminifactory.com/object/3d-print-jet-engine-component-planetary-gear-75171
Major parts (listed below) are separated to two-parts to eliminated the my special support.
A. Affected parts
(1) Gear10-Carrier01ws → Gear10-Carrier101 and Gear10-Carrier102
(2) Gear-Box-Rear01ws → Gear-Box-Rear101 and Gear-Box-Rear102ws
(3) Gear-Ring-Sft01ws → Gear-Ring-Sft101 and Gear-Ring-Sft102
New parts are assembled by screws (M1.4x3.5L), and glued if you want.
B: Download files includes;
-files: STL Files (6 items)
STL file name: "ws" of last 2 digits means "With Support" which special designed.
C: Purchase Parts Information;
Additional Screws (M1.4x3.5L) 13ea
D. Assembly Points
- Standard Skill (such as Drilling, Tapping, Filing, Tightening, Painting and Gluing etc.) is needed.
E. Total Net Print Time: Approx. 11 Hr (Origina parts=18 Hr)
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted by your experience.
F. 3D printing settings
Raft, Support, Layer Height, Infill: Depending on your experience.
My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.
I do hope you enjoy making!!
See text
Date published | 26/09/2021 |
Support Free | YES |