KS2AZT17 - Aztlan Ball Court
KS2AZT17 - Aztlan Ball Court
Published 2023-06-29T05:02:42+00:00
Aztlan was one of the first sets we made at Aether Studios. Originally for the patrons of the Dungeonprint software, then for our own patrons before launching a kickstarter for it in 2020. Years later that kickstarter has long since ended, the core and stretch rewards filled, and still we are publishing new sets.
The ideas and requests never stop coming. This one came out of a few requests on our Discord group, and we were glad to see them worked up right. We hope this set finds a welcome place on your table and in your adventures.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Date published | 29/06/2023 |
Support Free | YES |