Lazy Moose
$2.99 Lazy Moose
Published 2023-07-13T13:03:55+00:00
Lazy Moose!!
Print in place with no support and no assembly required. Just slice and print!
Feel free to scale them up or down as much as you want (the limit is your printer).
After printing the Moose, just move the articulations to get them free.
Update: Added a "By parts" version, for those of you not having a multicolor 3D printer. Note the antlers may need brim to be printed properly. After printing, just glue the antlers to the head (check pictures for correct orientation).
A good first layer is mandatory for the print to succeed. Be sure your printer is calibrated and you have good bed adhesion. I recommend a slow and thick first layer (8 mm/s and 0.3 mm).
Good layer cooling is also recommended, as it prevents curling and warping on overhangs.
For more tips, take a look at my printing tips (https://www.mcgybeer.xyz/printing-tips).
Date published | 13/07/2023 |
Price | $2.99 |
Support Free | YES |