PROVIDED STL FILES HERE ARE ONLY A FEW OF THE SELECTED PARTS TO ALLOW TEST FITTING OF LED AND MAGNETS PURPOSE. FOR COMPLETE KIT, PLEASE REACH OUT TO ME ON MY FACEBOOK PAGE: https://www.facebook.com/Jettohobby/

Watch how I designed the bust here: https://youtu.be/_-_R4AQAt3s

Features of the model kit:

Hi everyone, after months of iterations, I have finally completed the MSZ-006 Zeta Gundam Bust. Completely designed by me from scratch and 100% 3D Printed. Featuring articulated neck joint, magnetic open hatch mechanism and complete LED fitting and routing, the Mega size is measuring 285mm x 190mm x 223mm and the Normal size is measuring 148mm x 95mm x 115mm (Height x Width x Depth).

The whole kit comes with 66 individual parts in total to complete and I have prepared full assembly instruction (Normal Size) in 5 simple pages as shown in the pictures below. I have also completely painted the Mega Size (as shown in the pictures) with fully working LED setup. See pictures below for transformation possibilities and size comparison as well (Mega Size VS. Normal Size)

I have prepared original STL files and pre-supported files for both Mega Size and Normal Size scale. You will need to print a few clear parts to allow LEDs to shine through. Please feel free to send me a DM on my facebook page to buy the files from me. Much appreciated!

What you need:

• Mega Size:
  • 7 x Standard LED ø 5 mm
  • 10 x Neodymium Magnets ø 6 mm x 2 mm
• Normal Size:
  • 7 x Standard LED ø 3 mm
  • 10 x Neodymium Magnets ø 3 mm x 1 mm