Nespresso Vertuo capsule dispenser
Nespresso Vertuo capsule dispenser
3D
Published 2021-03-01T11:02:29+00:00
I modeled this dispenser because it allows you to quickly refill capsules next to the coffee maker because you just have to remove the pre-cut part of the box to fit into the dispenser. I have been using them for 2 years now and they are still as effective as ever.
I use 2 types of capsules : Hazzelino muffin and Decaffeinato ontuoso. Unfortunately the size of the box is not universal in this range of capsules.
Here are the sizes of the boxes for which I modeled the dispenser (both available into the .zip file):
- Hazzelino muffin: 60mm x 65mm
- Decaffeinato ontuoso: 60mm x 60mm
If you don't use the same capsules as me, the box size may be the same (I don't know all the box sizes). And if the size does not match, I hope I have given you some good ideas.
supports not required
My parameters :
- nozzle size : 0.4mm
- layers height : 0.2mm
- wall lines count : 3
| Date published | 01/03/2021 |
| Time to do | 300 - 301 minutes |
| Material Quantity | 52g |
| Dimensions | 86mm x 66mm x 133mm |
| Support Free | YES |