Phone Charger Stand
2,037
views
44
downloads
0 comments
Loading comments...
Phone Charger Stand
3D
Published 2018-01-22T11:16:41+00:00
0
0
Add to Collection
Description
This is stand for mobile while charging to wall plug. It's specifically done for Lenovo Vibe K5 Note charger and made with Fusion 360.
It works best for Lenovo K5 Note charger ( inside 44mm x 28mm ) and above part is 160mm x 90mm
Also uploaded in Thingiverse
Printing Details
Printing with 0.4 layer height with 3/3/3 (Top/Bottom/Outline) setting in PLA or ABS works fine for design check and it will take 2 hours 40 minutes to print on 0.4 mm nozzle dia and 20% or more infill works fine and it can be good upto 50% and 100% may not required.
With 0.3 mm layer height time will be 3.40 hours and with 0.2 mm layer height time of print will be 5 hours approx.
Technical Information
Date published | 22/01/2018 |
Time to do | 2 - 40 minutes |
Material Quantity | 75 |
Dimensions | 166x40x93 |
Technology | FDM |
Complexity | Easy |
Support Free | YES |
More Information
Object Parts