PS4 controller single handed adapter
PS4 controller single handed adapter
3D
Published 2020-04-21T19:37:06+00:00
This is a 1 handed adaptor for the ps4 controller. it can be made for right or left haded people.
you will need to print sone component mirrored for the bottom lever:
-top lever
-top lever sping
you will need to print 2 of:
-pusher
-finger pusher.
you will need some hardware:
-m3 by 15mm x4
-m3 by 10mm x8
- springs 5mm diameter by 15mm long x2
the spring can vary slightly in size
these bolts are screwed directly into the plasic of the lever arms
i sugges printing with 20% infill and 4 perimeters with a 0.4mm nozel. 1mm top and bottom layer at 0.2mm layer hight.
the adapter is held on with 3 hair ties looped from the top to the bottom.
this is set up for a right handed person but it can be used for left by mirroring the 2 main body pieces too:
-main body bottom
-main body top.
| Date published | 21/04/2020 |
| Support Free | YES |