Good design ... took me a while to figure out how the middle leg is installed. Had to glue the leg insets

I had to correct the thin walls that these models have. I could not slice it with Simplify3D. I now have the repaired files and will print bigger!

Back broke when trying to put it together. But otherwise came out great.

Wanted to print this for a friend, because he is a really big Star Wars fan. Printed it with 200% scale and 0.2mm Layer height. This is really good designed and fits together perfectly.

Well designed. The outer body (that slides onto the blue interior) is quite fragile, though, so it might benefit you to scale this up a bit.

I had a little trouble getting the centre of R2 inserted and broke the outer casing.. so he looks like his just come back from the battle of Yarvin

Nice model, tnx

tried

Printed on a Geeetech i3 B Pro (£140) printer at 0.1mm layer height using PLA Thank you so much for sharing your models for us to print !!!

Printed on a Geeetech i3 B Pro (£140) printer at 0.1mm layer height using PLA Thank you so much for sharing your models for us to print !!!

Printed on a Geeetech i3 B Pro (£140) printer at 0.1mm layer height using PLA Thank you so much for sharing your models for us to print !!!

Printed on a Geeetech i3 B Pro (£140) printer at 0.1mm layer height using PLA Thank you so much for sharing your models for us to print !!!

Printed on a Geeetech i3 B Pro (£140) printer at 0.1mm layer height using PLA Thank you so much for sharing your models for us to print !!!

Model fit together great. Printed at 200%

i enlarged original to 300%, was difficult to insert body so i ground off the leg support flange so i could move the legs out of the way to slide to body in, i did crack the outer body a little bit inserting the middle body

What a nice model! Perfect designed, and looks really professional. Printed in original size (ca. 55mm high) with 0.12 layer height.